Lippert Components Hydro-Sync Slideout System - Manual (Page 11)

Note: The Lippert Hydro-Sync Slideout System is designed to operate
as a negative ground system. A negative ground system utilizes the
chassis frame as the ground source. An independent ground wire back
to the battery is not needed. It is important the electrical components
have good wire to chassis contact. To ensure the best possible ground,
a star washer should be used. Over 90% of unit electrical problems can
be attributed to bad ground connections.
Note: For long-term storage: It is recommended that the room be
closed (retracted) and if your unit is equipped with the IRC room control,
it is recommended all of the control knobs be kept in the closed position.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONSULT YOUR
LOCAL AUTHORIZED DEALER OR CALL LIPPERT AT:
(866) 524-7821.
11