Lippert Components Hydro-Sync Slideout System - Manual (Page 3)

SYSTEM
WARNING
FAILURE TO ACT IN ACCORDANCE WITH THE FOLLOWING
MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH.
The Lippert Hydro-Sync Slideout System is intended for the
sole purpose of extending and retracting the slideout
room. Its function should not be used for any other
purpose or reason than to actuate the slideout room. To
use the system for any reason other than what it is
designed for may result in damage to the coach and/or
cause serious injury or even death.
Before actuating the system, please keep these things in
mind:
1. Parking locations should be clear of obstructions that
may cause damage when the slideout room is actuated.
2. Be sure all persons are clear of the coach prior to the
slideout room actuation.
3. Keep hands and other body parts away from slideout
mechanisms during actuation. Severe injury or death
may result.
4. To optimize slideout actuation, park coach on solid and
level ground.
DESCRIPTION
The Lippert Hydro-Sync Slideout System is a hydraulic cylinder drive
system. Utilizing a bidirectional electric motor to actuate the pump,
moving fluid from the reservoir into the hydraulic cylinders to extend the
room and pumping fluid back to the reservoir to retract the slideout. The
Lippert Hydro-Sync Slideout System is designed as a negative ground
system.
There are no serviceable parts within the power unit. If the motor,
manifold, pump or reservoir fails, the entire power unit must be replaced.
Disassembly of the motor voids the warranty.
Mechanical portions of the slideout system are replaceable. Contact
Lippert Components, Inc. to obtain replacement parts.
3