Lippert Components Hydro-Sync Slideout System - Manual (Page 8)

Fig. 5
B
C
1. Remove protective label. (See Fig 6).
2. Using a standard hex bit, insert into auxiliary
drive device, i.e. cordless drill or
screwdriver or ratchet wrench.
MANUAL OPERATION
The Lippert Hydro-Sync Slideout System can be run with auxiliary power
devices like electric drills, ratchet wrenches or cordless screwdrivers. In
the event of electrical or system failure, this manual method of extending
and retracting the slideout room can be used. A standard handheld drill
is all that is required. A standard 38" room will take approximately 45
seconds to retract. See the instructions below.
Fig. 6
8