Lippert Components In Wall Slide-Out System - Manual (Page 2)

Rev: 11.21.2014
Page 2
IN-WALL™ Slide-out Owner's Manual
System and Safety Information
Safety Information
Failure to act in accordance with the following may result in death, serious injury,
coach or property damage.
The IN-WALL™ Slide-out System is intended for the sole purpose of extending and retracting the slide-out room. Its
function should not be used for any purpose or reason other than to actuate the slide-out room. To use the system
for any reason other than what it is designed for may result in death, serious injury or damage to the coach.
Before actuating the system, please keep these things in mind:
1. Parking locations should be clear of obstructions that may cause damage when the slide-out room is
actuated.
2. Be sure all persons are clear of the coach prior to the slide-out room actuation.
3. Keep hands and other body parts away from slide-out mechanisms during actuation.
4. To optimize slide-out actuation, park coach on solid and level ground.
TABLE OF CONTENTS
System and Safety Information 2
Safety Information 2
Prior to Operation 3
Operation 3
Extending Slide-out Room 3
Retracting Slide-out Room 3
Troubleshooting 4
Controller Overview (B Version) 4
Controller Overview (C-2 Version) 5
Electronic Manual Override 6
Extend and Retract Switch Connections 6
Power and Ground Connections at the Controller 6
Error Codes 6
Low Voltage 6
Obstructions 7
Checking Fuses 7
Motors and Harnesses 7
Resynchronizing the Slide-out Motors 7
IN-WALL™ Slide-out Assembly 8
IN-WALL™ Slide-out Controllers 9
IN-WALL™ Slide-out Motors 10
IN-WALL™ Slide-out Components 11 - 14