Longshine LCS-8038TXR7 - Manual (Page 10)

Quick Installation Guide
Please take the following steps for driver installation.
Microsoft Windows 95/Windows 98/Windows ME
1. Turn off the computer.
2. Insert the adapter into the available PCI slot.
3. Restart the computer.
4. After Microsoft Windows reboot, the PCI Ethernet
Controller will be found.
5. The system will prompt for driver installation.
6. Insert the “Driver and Utilities” diskette into diskette driver
and press <Enter>.
7. For Windows 95, Key in a:\ path to install driver for the
adapter.
8. For Windows 98, Key in a:\w98_2000 path to install driver
for the adapter.
9. For Windows ME, Key in a:\winme path to install driver for
the adapter.
10. The Windows system will install the driver automatically.
11. Reboot the Windows system.
Windows NT
1. Turn off the computer.
2. Insert the adapter into the available PCI slot.
3. Restart the computer.
4. Click “Start” menu bar and select “Setting” item then
“Control Panel” setting
5. Select “Network” icon
6. If this is the first time to install network on the machine
then the system will ask “YES” or “NO” to install network
adapter. Please select “YES”
7. If the computer already install network before then you
need to select “Interface” -> “Add”
8. The system will prompt for driver installation.
9. Insert the “Driver and Utilities” diskette into diskette driver
and press <Enter>.
10. Key in a:\winnt path to install driver for the adapter
11. The Windows system will install the driver automatically.
12. Reboot the Windows system.
E-10