Longshine LCS-8038TXR7 - Manual (Page 8)

After choosing the <Run Diagnostics on Board> item, the
screen will display like,
ˡ̂˷˸ʳ˜˗ˁˁˁˁˁˁˁˁˍʳ˃˃ʳ˸˃ʳˊ˷ʳ˶˃ʳ˃˃ʳ˃˄ʳ
ˡ˸̇̊̂̅˾ʳ˦̃˸˸˷ˁˁˍʳ˄˃˃ˠ˵̃̆ʳ
˜˂ˢʳ˕˴̆˸ʳˁˁˁˁˁˁˍʳ˘˃˃˃˛ʳ
˜́̇˸̅̅̈̃̇ʳˁˁˁˁˁˍʳ˄˄ʳ
˙̈˿˿ˀ˗̈̃˿˸̋ʳˁˁˁˍʳ˗˼̆˴˵˿˸˷ʳ
ʳ
ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳˣ˴̆̆ʳ˖̂̈́̇ʳʳ˙˴˼˿ʳ˖̂̈́̇ʳ
˔ˁʳ˜˂ˢʳ˥˸˺˼̆̇˸̅ʳ
˕ˁʳ ˄˃˃ˠ˵̃̆ʳ˟̂̂̃˵˴˶˾ʳ
˖ˁʳ ˄˃ˠ˵̃̆ʳ˟̂̂̃˵˴˶˾ʳ
˗ˁʳ˖˴˵˿˸ʳ˖̂́́˸˶̇˼̂́ʳ
ʳ
<Cable Connection> test reminds you that the connection
link might be fail, either the cable is not connected or the
cable link fails.
For the <Run Diagnostics on Network> test, it is
necessary to connect your computer with its supporting hub
or another computer. This is a "Ping-Pong" test. This test
cannot be completed except two computers on the LAN for
sending or receiving the test packets between computers.
For the <Run Diagnostics On Network> test
Master Machine: Master machine sends magic packet or
wake up frame through the network.
Target Machine: Target machine is notified whenever a
qualified wakeup packet is received.
E-8
Network
Ethernet Address
00E07DC00002
Target Machine
Ethernet Address
00E07DC00001
Master Machine