Maxim Integrated 73M1866B/73M1966B FXOCTL Application - Manual (Page 11)

UG_1x66B_009 73M1866B/73M1966B FXOCTL Application User Guide
Rev. 4.1 11
2.5 Dial Commands
The dial is the command for managing pulse dial feature. With this command the user can perform
pulse dialing with a numeric digit string, abort or cancel an on-going dial process, or changing or display
pulse dial timing parameter. To display the dial timing parameter omit all input after the token “param”.
Syntax
FXOCTL:NN> dial <nnnnnnnnn> (dial number nnnnnnnnnn)
dial cancel (cancel dial)
dial param <ii> <jj> <kk> (change param to ii jj & kk)
dial param (display timer parameters)
Where: nnnnnnnn Numeric dial string.
ii On-hook duration.
jj Off-hook duration.
kk Inter-digit duration.
The following is a log of the command:
1. Dial on current active channel (0) with the dial string of “7142136016”.
2. Cancel an on-going dial command.
3. Change dial timer parameters – on-hook duration to 40, off-hook duration to 60 and inter-digit
duration to 800 ms.
Figure 8: Dial Command Logging Session
FXOCTL:00> dial 7142136016
FXOCTL:00> dial cancel
Cancel pulse dial on current active channel: 0.
FXOCTL:00>
DIAL_ABORTED(0)
FXOCTL:00> dial param 40 60 800
FXOCTL:00> dial param
On-hook duration : 40 ms.
Off-hook duration : 60 ms.
Inter-digit duration: 800 ms.
FXOCTL:00>
Set dial parameters to
40, 60, and 800 ms.
Display dial parameters.
Dial 7142136016.
Cancel a dial session.