Maxim Integrated 73M1866B/73M1966B FXOCTL Application - Manual (Page 13)

UG_1x66B_009 73M1866B/73M1966B FXOCTL Application User Guide
Rev. 4.1 13
2.7.2 On-Hook Command
The onhook command brings the FXO channel on-hook.
Syntax
FXOCTL:NN> onhook (Bring current channel ID off-hook)
FXOCTL:NN> onhook <XX> (Bring channel XX off-hook)
Where: XX Channel ID.
NN Show the current active channel ID.
The following is a log of commands that bring the current channel ID and channel 4 on-hook.
Figure 11: On-Hook Command Logging Session
2.8 FXO Line Status and Monitor
The FXO line’s current and voltage can be autonomously monitored by setting the desired level of the IET
(Interval Event Table). The FXOCTL provides commands for managing the IET and controlling the
monitoring process.
FXOCTL:00> onhook
Channel 0 is ON-hook.
FXOCTL:00>
FXOCTL:00> onhook 4
Channel 4 is ON-hook.
Take current channel (0) on-hook.
Take channel 4 on-hook.