Maxim Integrated 73M1866B/73M1966B FXOCTL Application - Manual (Page 12)

73M1866B/73M1966B FXOCTL Application User Guide UG_1x66B_009
12 Rev. 4.1
2.6 Exit Command
The exit command terminates the FXOCTL program. When issued, the user is prompted and asked to
confirm with a Y(es) or N(o). A “yes” terminates the program.
Syntax
FXOCTL:NN> exit
Where: NN Shows the current active channel ID.
The following is a log of the command to exit the FXOCTL program.
Figure 9: Exit Command Logging Session
2.7 Hook Switch Operation
The FXOCTL provides commands to manually control the hook switch operation of the FXO channel.
The FXO channel can be switched off hook or on hook.
2.7.1 Off-Hook Command
The offhook command brings the FXO channel off-hook.
Syntax
FXOCTL:NN> offhook (Current channel ID off-hook)
FXOCTL:NN> offhook XX (Channel ID XX off-hook)
Where: NN Shows the current active channel ID.
The following is a log of commands that bring the current channel ID and channel 4 off-hook.
Figure 10: Off-Hook Command Logging Session
FXOCTL:00> exit
Are you sure you want to quit? (Y or N)y
Good bye!
FXOCTL:00> offhook
Channel 0 is OFF-hook.
FXOCTL:00>
FXOCTL:00> offhook 4
Channel 4 is OFF-hook
Enter “Y” to confirm.
Take current channel (0) off-hook.
Take channel 4 off-hook.