MF Digital Spectrum 2 Thermal (Rev: 03/05/01) - Manual (Page 42)

Spectrum2 Printer Operator’s Guide
Document Revision: 100102
41
• As the computer starts up it will display a message on how to check
computer BIOS setup.
• Usually, this requires pressing the DEL or ALT or F2 or some other key
• After pressing the appropriate key, a list of choices or menu will be
displayed
• Choose to review the advanced settings, look for Parallel Port Mode
listing or Integrated Peripherals listing
• Proper settings are:
• Parallel Port Mode setting shows: ECP or EPP
• Change to: Normal
• Exit the BIOS settings by selecting Exit, and save any changes.
• Shutdown then re-start computer, then start Spectrum2 Designer
Program and try printing a CD label.