MF Digital SCRIBE EC_PC_manual - Manual (Page 33)

CD-3706/P Operator’s
Guide
Document Revision: 030501.1
Scribe EC Standalone Series
Operator’s Guide
Document Revision: 011804
Page 33
Creating A Hard Disk Image
The Scribe EC Standalone comes equipped with an internal hard disk drive,
which can be used to store copies of master discs for later recording or
comparing. Each master is saved as a single image file. Up to six images
can be stored on the hard disk at one time.
A hard disk image is useful as a convenient way of copying standard master
discs. For example, create hard disk images for three or four master discs
which are needed on a regular basis, and access them to make copies as
required.
Creating A Single Hard Disk Image
Although the Scribe EC Standalone’s internal hard disk can store up to six
images of master discs, it is sometimes prudent not to use this Multiple
Image feature and only allow one image to be created and stored. For
example, using a single image simplifies the copying process. This reduces
the chance that an operator might make copies of the wrong master by
selecting the incorrect hard disk image.
To create a single hard disk image (multiple images disabled), the steps are
as follows:
• From the main operating screen depicted below:
• Press the “COPY” key. The screen will now read:
• Press the “Stop/No” key. The screen will now read: