MF Digital SCRIBE EC_PC_manual - Manual (Page 38)

CD-3706/P Operator’s
Guide
Document Revision: 030501.1
Scribe EC Standalone Series
Operator’s Guide
Document Revision: 011804
Page 38
Note: If the master failed to copy to the hard drive properly, the
master disc will be placed in the reject area in front of the
drives. These discs should not be used.
Multiple Images Enabled
To make copies from hard disk images that were previously created with
the Multiple Images feature “enabled”, the steps are as follows:
• From the main operating screen depicted below:
• Load as many blank discs as are required into the recorders. Press the
“COPY” key on the keypad. The screen will now read:
• Press the “Start/Yes” key. The screen will now read:
Along the top line of the display will scroll the available images,
identified by their number (1, 2, 3, 4, 5 and 6). The Scribe EC
Standalone defaults to the first image (1). For the purposes of this
example, press the “1” key to select this image, followed by the
“Start/Yes” key. The screen will now read:
Progress will be displayed on the screen during the operation:
• Press the “Start/Yes” key, and you will be returned to the main
operating screen: