MF Digital Director EC Publishing Series - Manual (Page 62)

DIRECTOR EC Series Operator’s Guide Document Revision: 080904
Page 61
Help Displays on-screen help.
General Options
Vertically along the left side of the Job tab is a series of nine check boxes:
Copy, Verify, Print, Print First, Simulate, Archive, Align, SmartGuard
Media. The first step in creating a job is to set the general options so as to
define which operations the DIRECTOR EC will perform when the job is
submitted for production.
• Check or uncheck the option boxes to enable or disable the production
options needed for your job:
General Options:
Copy When checked, the CDs in the submitted job will be
recorded using the disc image file selected in the
IMAGE field.
Verify When checked, the CDs in the submitted job will
automatically be compared against the source files
after recording is completed.
Print When checked, the CDs in the submitted job after
recording will be printed with the disc label selected
in the LABEL FILE field.
Print First When checked, the CDs in the submitted job before
recording will be printed with the disc label selected
in the LABEL FILE field.
Simulate When checked, the CDs in the submitted job will
not be recorded.
Archive When checked, an existing CD is saved to the hard
drive as a physical image file for later recording.
This option is used for duplicating existing CDs.
Align When checked, CDs will be placed on the optical
aligner so that the disc may be oriented relative to
the alignment mark. This is used for over-printing
silk-screened discs.
DIRECTOR EC systems equipped with Pioneer DVD-R drives
do not support MF Digital SmartDRIVE features.
Note: