MF Digital Director EC Publishing Series User Manual
Page 9
DIRECTOR EC Series Operator’s Guide
Document Revision: 080904
Page 8
The Best Place To Put The DIRECTOR EC
The best operating location for the DIRECTOR EC publishing system is in
a climate controlled area, free of dirt, dust, humidity, excessive heat, and
electronic or electromagnetic interference. Room temperature should be
between 65 and 75 degrees Fahrenheit, or between 18 and 23 degrees
Celsius. Place the DIRECTOR EC on a solid, steady work surface and
allow sufficient room for all incidental work materials. Provide at least six
inches of clearance on all sides of the unit for ventilation.
Safety Precautions
The system is shipped with a three-prong power connector and must be
used with a properly grounded AC receptacle. DO NOT try to defeat the
third “ground” prong. All computer peripherals must be properly grounded
and the DIRECTOR EC is no exception. The use of a power conditioner
such as an Uninterruptible Power Supply (UPS), or a surge protector is
highly recommended. At the very least you should consider connecting the
PC portion of the DIRECTOR EC to a UPS. The minimum required size is
500VA.
Repairs or alterations should only be attempted by authorized factory
trained technicians. MF Digital reserves the right to void the warranty if
unauthorized service is performed.