Compaq CP-2E - Manual (Page 21)

2–8 iPAQ Connection Point CP-2E User Guide
Installation and Configuration
2. Click Yes on the Connection Method screen. Choose the appropriate
Internet Connection Method:
> Dynamic Internet IP: This is the default setting for the
Connection Point CP-2E. If your internet service provider (ISP)
automatically assigns you a public IP address (common among
cable providers) or if you are unsure of the other options, select this
option.
> Static Internet IP: If your ISP provided you with a static IP
address, select this option.
> PPPoE: The point-to-point over Ethernet (PPPoE) connection is
the most likely choice for DSL service. A PPPoE user name and
password must be provided to you by your ISP.
Dynamic Internet IP
This setting configures your Connection Point CP-2E to automatically
obtain an IP address from your ISP. This is the most common setting, and
should be used unless your ISP provided specific instructions for use of a
static IP address or point-to-point protocol over Ethernet (PPPoE).