Installing the firmware update utility, Installing the firmware update utility –15 – Compaq CP-2E User Manual

Page 28

Advertising
background image

Installation and Configuration

iPAQ Connection Point CP-2E User Guide

2–15

3. If your connection status reads Disconnected in red print, click on the

Help icon to troubleshoot configuration problems. If the problem
continues, it is possible that your ISP is tracking a MAC address.
Please refer to Chapter 5 for a full discussion of MAC Spoofing.

Installing the Firmware Update Utility

The Connection Point CP-2E firmware update utility enables you to
repair the system in case of failure.
It is recommended that you install the utility during initial set-up.

Advertising