Compaq CP-2E - Manual (Page 57)

5–10 iPAQ Connection Point CP-2E User Guide
Advanced Setup Icons
3. Click Add. The Add Virtual Server Table will appear.
4. Type or select the information you wish to add or change into the
relevant fields.
5. Click Apply. The Connection Point CP-2E must be rebooted for
applied changes to take effect.
6. Click OK. You can reboot the Connection Point CP-2E at any time by
clicking the Reboot button at the left.
Packet Filtering
Packet filtering allows you to block specific services, applications, and
Internet locations by IP addresses and port numbers. For example, you
can deny users access to SMTP/POP3 email services on the Internet,
while allowing them access to Web/HTTP services. You can add new
packet filtering rules based on the destination IP address. Packets en route
from the LAN or private network to the WAN or public network are
evaluated against these rules.
Packet Filtering: Enable or disable all packet filtering processes.
This affects IP and port filtering rules.