Mytek Digital Protools HD DIO Card (ver. 1.1 / Oct 2010) - Manual (Page 11)

Mytek Protools-HD DIO Card – User Manual
9. Screw in converter top cover.
10. Connect power and signal lines.
11. Turn the converter on.
After boot up (which takes approx 20 sec) converter will switch
to regular mode, and Protools-HD DIO Card (DIOCARD1) can
now be selected as signal source.
User Manual ver. 1.1 / oct 2010 www.mytekdigital.com Page: 11 / 29