Mytek Digital Protools HD DIO Card (ver. 1.1 / Oct 2010) - Manual (Page 28)

Mytek Protools-HD DIO Card – User Manual
5. Carefully insert new memory chip in the socket. The
chip slot (pin1) should be matching the socket slot ie
must be facing back of the unit. If necessary gently
manually bend pins inward, to match the holes in the
slot.
6. Mount the top cover back.
During installation check
correct chip orientation.
User Manual ver. 1.1 / oct 2010 www.mytekdigital.com Page: 28 / 29