Mytek Digital Protools HD DIO Card (ver. 1.1 / Oct 2010) - Manual (Page 6)

Mytek Protools-HD DIO Card – User Manual
5. Routing configuration within converters
The Mytek 8X192 ADDA SOURCE TO DIGITAL OUT
defines sources of audio signals that are sent from the
converter to the ProTools system and all other digital
outputs (all digital outputs are simultaneous). SOURCE TO
ANALOG OUT defines sources of audio signals that are
transmitted to the DAC in the
converter.
6.
I/O signal configuration
In Setup > I/O Setup you can assign signal sources to
interfaces.
7. Input selection – start of recording
Choose preconfigured inputs and outputs in Pro Tools, test
record, and then playback of selected audio tracks.
Remember that 8x192
ADDA converter has eight
channels. Selecting
channels 9-16 as audio
sources will result in no
signal (digital silence).
User Manual ver. 1.1 / oct 2010 www.mytekdigital.com Page: 6 / 29