NORAC UC5-BC-AL Manual - Manual (Page 24)

20
7.3 Retune
On occasion it is necessary to recalibrate the NORAC UC5 Height Control System. You may
want to perform a retune when:
 A hydraulic solenoid has been changed.
 A hydraulic pump has been changed or adjusted.
 A different tractor has been connected to the sprayer.
 The tractor’s hydraulic flow control has been adjusted.
Navigate to the UC5 setup
screen.
When the UC5 setup window is
displayed, make sure the drop
down box under the Norac logo
is populated.
Select Retune.
A list of precautions will be
displayed on the terminal. It is
very important that you read
these precautions and follow
them.
Once you have read the
precautions, click the PROCEED
button.