OFM 902-DK - Manual

A
Stool Seat
1 Unit
C
Gas Lift Bellows
1 Unit
D
5-Star Base
1 Unit
E
Casters
5 Units
B
Gas Lift
1 Unit
CAUTION:
1. Do not use this stool as a step ladder.
2. Check for loose screws and tighten them every 6 months.
Models 902 / 902-DK / 902-VAM / 902-VAM-DK
UtiliStool
WEIGHT CAPACITY: 250 lbs.
Parts Listing
04.29.2014
E
D
B
C
A
STOP
Assembly Instructions:
Tools Needed: Philips Head Screwdriver
Please read all instructions before assembly.
Step 1: Insert Casters (E) into 5-Star Base (D).
If you are assembling a model with a DK Foot Ring please proceed
to subsequent pages for drafting kit assembly instructions.
Step 2: Insert Gas Lift (B) into 5-Star Base (H).
Step 3: Cover Gas Lift (B) with Gas Lift Bellows (C).
Step 4: Carefully place Stool Seat (A) onto the Gas Lift (B),
aligning the holes. Press down on Stool Seat (A)
to secure onto 5-Star Base (D).
STOP
919-362-4765 (fax)
www.ofminc.com
161 Tradition Trail, Holly Springs, NC, 27540
800-520-7471 (voice)
919-303-6389 (voice)
[email protected]