OFM E1001 User Manual

Model e1001, Assembly instructions

Advertising
background image

A

Casters

5 Units

B

Star Base

1 Unit

C

Gas Lift

1 Unit

D

Telescopic Bellows

1 Unit

E

Seat Cushion

1 Unit

F

FL/FR Arm Rest

2 Units

G

Screws (1/4”x1-1/4”)

4 Units

H

Screws (1/4”x1-1/8”)

2 Units

I

Seat Mechanism

1 Unit

J

Screws (1/4” x 3/4”)

4 Units

K

Back Cushion

1 Unit

M

Allen Key (5mm)

1 Unit

L

Screws (5/16”x1-1/8”)

4 Units

Model E1001

Parts Listing

STOP

Assembly Instructions

Tools Needed: Phillips Head Screwdriver

Please read all instructions before assembly.
Step 1: Insert Casters (A) into bottom of Star Base (B). Insert Gas

Lift (C) into center hole of Star Base (B). Cover Gas Lift (C)

with Telescopic Bellows (D).

Step 2: Attach Arm Rests (FL & FR) to Seat Cushion (E) using

Screws (G) for front holes and Screws (H) for back holes.

Tighten with screwdriver.

Step 3: Attach the Seat Mechanism (I) to the Seat Cushion (E),

with arrow on mechanism facing chair front, using Screws (J).

Tighten with screwdriver.

Step 4: Attach Back Cushion (K) to Seat Cushion (E) by inserting

Screws (L) through steel plate and into bottom of cushion.

Step 5: Attach assembled chair to Star Base (B) by inserting top of

Gas Lift (C) into the hole in the center of the Seat Mechanism

(J). Press downly firmly on the Seat Cushion (E) to secure.

05.17.2010

1

2

3

5

4

Assembly Notes:

During assembly, hand tighten screws only. When all screws

are in place, you may then tighten all screws completely.
CAUTION:

1. Do not use this chair as a step ladder.

2. Check for loose screws and tighten them every 6 months.

919-362-4765 (fax)

161 Tradition Trail Holly Springs, NC, 27540
800-520-7471 (voice)
919- 303-6389 (voice) [email protected]

C

E

D

C

B

A

K

E

L

I

J

E

E

H

G

F

Advertising