On Networks N300RM User Manual - Manual (Page 103)

Supplemental Information
103
N300 WiFi ADSL2+ Modem Router (N300RM)
Factory Settings
You can return the modem router to its factory settings. Use the end of a paper clip or some
other similar object to press and hold the Reset button for at least 7 seconds.
Reset button
Figure 10. Reset button
The modem router resets, and returns to the factory settings, as shown in the following table.
Table 4. Factory default settings
Feature Default Behavior
Router login User login URL http://www.mywifirouter.com
User name (case-sensitive) admin
Login password (case-sensitive) admin
Internet
connection WAN MAC address Use default address
WAN MTU size 1458
Port speed Autosensing
Local network
(LAN) LAN IP 192.168.0.1
Subnet mask 255.255.255.0
RIP direction None
RIP version Disabled
RIP authentication None
DHCP server Enabled