On Networks N300RM User Manual - Manual (Page 49)

Security Settings
49
N300 WiFi ADSL2+ Modem Router (N300RM)
Set Up Email Alerts
To receive logs and alerts by email, provide your email information in the E-mail screen and
specify which alerts you want to receive and how often.
Select Security > Email to display the following screen:
Figure 8. E-Mail screen
• Turn E-mail Notification On . Select this check box if you want to receive email logs and
alerts from the modem router.
• Send to This E-mail Address
. Enter the email address where you want logs and alerts
sent. This email address is also used as the From address. If you leave this field blank,
log and alert messages are not sent by email.
• Your Outgoing Mail Server
. Enter the name or IP address of your ISP’s outgoing
(SMTP) mail server (such as mail.myISP.com). You might be able to find this information
in the configuration settings of your email program. Enter the email address to which logs
and alerts are sent. This email address is also used as the From address. If you leave
this field blank, log and alert messages are not sent by email.
• My mail server requires authentication . If you use an outgoing mail server that your
current ISP provided, you do not need to select this field. If you use an email account that
is not provided by your ISP, select this field, and enter the required user name and
password information.
• Send Alerts Immediately
. Select the corresponding check box if you would like
immediate notification of a significant security event, such as a known attack, port scan,
or attempted access to a blocked site.
• Send logs according to this schedule
. Specifies how often to send the logs: Hourly,
Daily, Weekly, or When Full.
- Days . Specify which day of the week to send the log. This is relevant when the log is
sent weekly.