Power led is off, Power led is red, Troubleshoot with the leds – On Networks N300RM User Manual User Manual
Page 95: Power led is off power led is red
Troubleshooting
95
N300 WiFi ADSL2+ Modem Router (N300RM)
Troubleshoot with the LEDs
When you turn on the power, the Power, Ethernet, and ADSL LEDs light as described here. If
they do not, refer to the sections that follow for help.
To check the LEDs:
1.
When power is first applied, the Power LED lights.
2.
After approximately 10 seconds, the LAN and DSL LEDs light as follows:
a.
The Ethernet port LEDs light for any local ports that are connected.
b.
The ADSL link LED lights to indicate that there is a link to the connected device.
Power
Ethernet
ADSL
Internet
WPS
Wireless
Power LED Is Off
If the Power and other LEDs are off when your modem router is turned on:
•
Check that the power cord is correctly connected to your modem router and the power
supply adapter is correctly connected to a functioning power outlet.
•
Check that you are using the power adapter supplied in the package with this product.
If the error persists, you could have a hardware problem. Contact technical support.
Power LED Is Red
When the modem router is turned on, it performs a power-on self-test, during which time the
Power LED turns red. If the Power LED does not turn green within a minute or so or if it turns
red at any other time during normal operation, there is a fault within the modem router.