Canon 200 IS - Manual (Page 28)

Erasing Images
28
Active Display
If you tilt the camera gently from your wrist as shown in the illustration below,
you can switch the images you are viewing. You can also start and stop
movies
(p. 33) .
You can choose and erase images one at a time. Please note that erased
images cannot be recovered. Exercise adequate caution before erasing an
image.
Enter Playback mode.
● Press the
1 button.
X The last image you took will appear.
Choose an image to erase.
● Drag horizontally across the screen to
choose an image.
● You can also press the qr buttons or turn
the  dial to choose an image.
• Depending on how you tilt the camera, images may not switch.
• Be careful not to accidentally hit people with the camera.
• Be sure to hold the camera with the strap around your wrist to avoid
dropping it.
Switch to the next image Switch to the previous image
Hold the camera without
releasing the shutter button.
Erasing Images