Canon 200 IS - Manual (Page 93)

93
You can change the look of an image when shooting. However, the shooting
conditions may cause the image to become coarse, or the colors may not
come out as expected.
T Color Accent
You can choose to retain a single color and change the rest to black and
white in a composition.
Choose
T.
● Follow Steps 1 – 2 on p. 56 to choose T.
Press the
n button for more
than one second.
X The unchanged image and the Color
Accent image will both display.
● The color for default settings is green.
Specify the color.
● Position the center frame so it is filled with
the color you want and press the
q button.
X The specified color will be recorded.
Specify the range of colors.
● Press the op buttons or turn the  dial
to change the range of colors to be retained.
● Choose a negative value to limit the range
of colors. Choose a positive value to
extend the range of colors to similar
colors.
● Pressing the n button accepts the
setting and restores the shooting screen.
Changing the Color and Shooting
Recorded color
Using the flash may cause unexpected results in this mode.