Canon 200 IS - Manual (Page 92)

92
You can set the shutter speed to a range between 1 and 15 seconds to
shoot long exposures. However, you should attach the camera to a tripod to
prevent the camera from moving and blurring the image.
Choose
≈.
● Choose ≈ in Steps 1 – 2 on p. 56 .
Choose the shutter speed.
● Press the
m button, then press op
buttons or turn the  dial to choose [1"]
and press the
m button.
● Press the
op buttons or turn the  dial
to choose a shutter speed, then press the
m button.
Confirm the exposure.
● When you press the shutter button
halfway, the exposure for the chosen
shutter speed will appear.
Shooting Long Exposures
• The brightness of the image may differ from the brightness of the screen
in Step 3 when the shutter button was pressed halfway.
• When shutter speeds of 1.3 seconds or slower are used, images are
processed to eliminate noise after being taken. A certain amount of
processing time may be needed before you can take the next shot.
• It is recommended to set the [IS Mode] to [Off] when shooting with a
tripod
(p. 145) .
If the flash fires, the image may be overexposed. If this happens, set the
flash to
! and shoot.