Canon Elura 2 MC - Manual (Page 18)

18
E
Mastering
the Basics
You can record and play back a tape in SP (standard play) and LP (long play)
modes. LP extends tape usage by 1.5 times.
Changing the recording mode (SP/LP)
REC MODE••••SP VCR SET UP
( 34)
• When recording and playing back tapes in LP mode, the nature of the tape and
usage conditions may affect recording, mosaic-like noise may appear in the
image and the sound may be distorted during playback. For important
recordings, therefore, set the camera to SP mode.
• If you record in both modes on the same tape, the picture may become distorted
during playback and the time code may not be written correctly.
• A tape recorded in LP mode on other digital equipment may produce mosaic-
like noise and the sound may become distorted when played back on this
camcorder, and vice versa.
You can’t add sound (audio dubbing) or images (A/V insert) to a tape that has
been recorded in LP mode. If you plan to use either of these functions later,
record in SP mode.
16:9 (Widescreen TV recording)
Produces images in the 16:9 format for
playback on widescreen TVs.
To switch 16:9 to ON, open the menu and select CAM.SET UP. Then select
16:9, set it to ON and close the menu.
• “16:9” is shown in the display when you switch the 16:9 mode on.
• You cannot use the 16:9 mode with the Easy Recording program.
• You cannot use the 16:9 mode when the multi-image screen is set. The 16:9
display becomes set to “– – –”.
• If you play back a recording made for 16:9 on a normal TV screen, the image
will appear to be vertically “squashed” (compressed).
• If you connect the camera to a TV with an S1 terminal or the Video ID-1
system, recordings made in the 16:9 mode for wide screen TVs will
automatically play back in wide screen mode on the TV screen.
16:9••••••••OFF CAM.SET UP
( 34)
To change to LP mode, open the menu and select VCR SET UP. Then select
REC MODE, set it to LP and close the menu.
MOVIE P.SCAN VCR
CARD
PLAY
MOVIE P.SCAN
2_ELURA2_E(08-32) 7/25/00 17:03 Page 18