Compaq Presario 3000 Series - Manual (Page 33)

Installation 2-11
Placing the UPS in Operate mode
Press and hold the ON button (
2) until the LED 16 (1, ON LED) turns green,
indicating that power is available at the UPS output receptacles. The UPS will
acknowledge compliance with a short beep.
1
2
3
Figure 2-6. Operate mode controls
1 ON LED 3 STANDBY button
2 ON button
The Installation is Now Complete
■ For information on operating the UPS, see Chapter 3, “Operation.”
■ For information on changing the configuration of the UPS, see
Chapter 4, “Configuration.”
■ Use the Compaq website as an additional information source:
http://www.compaq.com