Compaq Presario 3000 Series - Manual (Page 43)

3-10 Compaq 3000 Series UPS Operation and Reference Guide
Returning to Standby Mode
When the UPS is in Operate mode (LED 16,
1, is green), pressing the
STANDBY button (
2) will place the UPS in Standby mode. The UPS will
acknowledge compliance with a short beep. LED 16 (
1) will extinguish, and
power to the loads will cease.
1
2
Figure 3-3. Standby mode controls
1 ON LED
2 STANDBY button
IMPORTANT:
■ While in Standby mode, the UPS maintains the charge on the batteries, but no power
is available at the output receptacles.
■ The UPS remains in Standby mode until an alternate mode is selected, or until utility
power is removed.