P. 43, P. 43) – Canon A420 User Manual
Page 45
43
Sh
oot
in
g
z
The default Color Accent is green.
z
You may not obtain the expected results after color input
mode if you use the flash.
z
The specified Color Accent is retained even if the camera's
power is turned off.
Shooting with Color Swap Mode
2
Press the DISP. button.
z
The camera will switch to color
input mode, and the display will
alternate between the original
image and the color accent image
(using the previously set color).
3
Aim the camera so that the color you wish to
retain appears at the center of the LCD
monitor and press the
W
button.
z
Only one color can be specified.
z
You can use the S or T button to specify the range of the
colors that are retained.
-5: Only takes the color that you want to retain.
+5: Also takes colors close to the one that you want to retain.
4
Press the DISP. button.
z
This completes the setting.
Original Color
(Before Swapping)
Desired Color
(After Swapping)