Canon A420 User Manual
Page 86
84
Protected!
z
You attempted to erase or edit a protected image or movie.
You attempted to erase or add a protected sound memo.
Too many marks.
z
Too many images have been marked with print settings or
transfer settings. Cannot process any more.
Cannot complete!
z
Could not save the print or transfer settings.
Unselectable image.
z
You attempted to set the print settings for a non-JPEG image.
Communication error
z
The computer was unable to download the image due to the
large amount of images (approx. 1000) stored on the memory
card.
Lens error, restart camera
z
Camera detected an error while moving the lens and cut the
power automatically. This error message may appear if you
press on the lens while it is moving or power up the camera in a
dusty or sandy environment. Power up the camera again and
shoot or playback images. Take the camera to a service center if
this message appears frequently because there may be a
problem with the lens.
Exx
z
(xx: number) Camera detected an error. Turn the power off and
then back on, then shoot or play back. A problem exists if the
error code reappears. Note the number and contact your Canon
Customer Support Help Desk. If an error code displays directly
after taking a picture, the shot may not have been recorded.
Check image in playback mode.