Canon A420 - Manual (Page 46)

44
z The default setting for Color Swap changes green into
white.
1
FUNC. Menu (Color Swap: still image)/
(Color Swap: movie) FUNC./SET button.
See Menus and
Settings
(p. 21) .
2
Press the DISP. button.
z The camera will switch to color
input mode, and the display will
alternate between the original
image and the color swap image
(using the previously set color).
3
Aim the camera so that the color you wish to
change appears at the center of the LCD
monitor and press the W button.
z Only one color can be specified.
z You can use the S or T button to specify the range of the
colors that are retained.
-5: Only takes the color that you want to change.
+5: Also takes colors close to the one that you want to
change.
4
Aim the camera so that the desired color
appears at the center of the LCD monitor
and press the X button.
z Only one color can be specified.
5
Press the DISP. button.
z This completes the setting.
Still images Movies