Philips 27PT6442-37 - Manual (Page 17)

A utomatically P rogram
IT
F our TV can automatically set
itself for local area (or Cable
TV) channels. This makes it easy
for you to select only the TV sta­
tions in your area when the
CHANNEL (+), (-) buttons are
pressed.
Note: Make sure the antenna or
cable signal connection has been
completed before AUTO PRO­
GRAM is activated.
^ Press the MENU button on
^ the remote to show the on­
screen menu.
^ Press the CURSOR UP A
or DOWN V buttons to
scroll through the on-screen
menu until the word Install
is highlighted.
Press the CURSOR RIGHT
^ > button to display the
Install menu features.
^ Press CURSOR UP A or
DOWN V buttons to scroll
the Install features until the
words Auto Program are
highlighted.
P Press the CURSOR RIGHT
^ > button to start the Auto
Program scanning of chan­
nels. Auto Programming will
store all available channels
in the TV’s memory then
tune to the lowest available
channel when done.
#' When finished, press the
^ STATUS /EXIT button to
remove the menu from the
TV’s screen.
I/ri.ri L I. lll.MS
When CABLE is selected, channels 1-
125 are available.
When ANTENNA is selected, chan­
nels 2-69 are available.
When AUTO is selected, the TV will
automatically set itself to the correct
mode based on the type of signal it
detects when the AUTO PROGRAM
feature is activated.