Philips 27PT6442-37 - Manual (Page 7)

B asic TV and R emote C ontrol O peration
J
Example of Models 27PT6441/37 and 27PT6442/37
Press the POWER button to
turn the TV ON.
Note: You can also press any
button on the front of the TV to
turn the TV ON.
Press the VOLUME + button
to increase the sound level, or
the VOLUME - button to
lower the sound level.
Pressing both buttons at the
same time will display the on­
screen menu. Once in the
menu, use these buttons to
make adjustments or selections.
Press the CHANNEL UP + or
DOWN - button to select TV
channels.
Point the remote control
toward the remote sensor win­
dow on the TV when operating
the TV with the remote.
REMOTE CONTROL
r o load the supplied batteries
into the remote:
1. Remove the battery compart­
ment lid on the back of the remote.
2. Place the batteries (2-AA) in
the remote. Be sure the (-I-) and (-)
ends of the batteries line up correct­
ly (inside of case is marked.)
3. Reattach the battery lid.
□ g
L Remote Sensor - Sensor for
activating remote control com­
mands when the remote is
used to control the TV. "
Standby Light Indicator - Red hght will show
when in the Standby Mode. Press the Power
button to return the TV to it’s active state.
Example of Models 27PT5441/37 and 32PT5441/37
Back of Remote
. Battery Conipartnient
■ 2-AA Batteries
Battery Lid