Setting up an access code – Philips 27PT6442-37 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
S
etting
U
p
an
A
ccess
C
ode
I
O
ver the next few panels you’ll
learn how to block channels
and get a better understanding of
the rating terms for certain pro
gramming.
First, let’s start by learning how to
set a personal access code:
^ Press the MENU button on
i the remote to display the on-
^ screen menu.
Press the CURSOR UP A or
DOWN V buttons until the
word Features is highlighted.
Press the CURSOR RIGHT
% > button to display the
^ Features menu options.
J Press the CURSOR UP A or
DOWN V buttons until the
words Auto Lock™ are high
lighted.
^ Press the CURSOR RIGHT
^ > button. The screen will
^ read, “Access Code-------------
#' Using the NUMBERED but
yl tons, enter 0, 7,1,1.
^ “XXXX” appears on the
Access Code screen as you
press the numbered buttons.
‘incorrect Code” will appear
on the screen, and you will
need to enter 0, 7 , 1 , 1 again.
The screen will ask you to
^ enter a “New Code.” Enter a
^ “new” 4 digit code using the
NUMBERED buttons. The
screen will then ask you to
CONFIRM the code you just
entered. Enter your new code
again. “XXXX” will appear
when you enter your new code
and then display the
AutoLock™ menu options.
Proceed to the next panel to learn
more...
NOTE: Active Control will only appear
in the menu of models 27PT6441/37 and
27PT6442/37.