Philips TS3654C - Manual (Page 20)

□ How TO U
se the
A
udio
A^
ideo
I
nput
J
acks
(C
ontinued
)
y ou can view the playback of
VCR tapes (Video Disc
Players, camcorders, etc), by
using the AUDIO and VIDEO
INPUT jacks (on the rear of the
TV).
For example: to view the play­
back of a VCR tape:
( becin )
Connect the VIDEO and
AUDIO IN(put) jacks on the
TV to the AUDIO and VIDEO
OUT(put) jacks on the VCR.
<l>
Press the MENU (M) button
on the remote, then press the
MENU A or T buttons to select
the word INPUT with the TV’s
on-screen arrow.
Note: You can press the CHAN­
NEL AT buttons to select
“VCR/AUX” (if it has been
added to the TV’s channel mem­
ory.) See page 7 for details.
Press the (-t) button to select
the VCR/AUX(iliary) INPUTS
on the rear of the TV.
<i> Tfirn the VCR ON and
PLAY the VCR tape to be
viewed on the TV.
\ ' / S maim H ki !•
Remember, when you're
* through using the A/V
INPUT jacks, return the INPUT
display screen on the TV to
ANTENNA. If you leave the TV
in the VCR/AUX INPUT mode
and there is no signal source con­
nected to the jacks, you will be
seeing only a blank screen on the
TV.
NOTE: If you have a mono (sin­
gle audio OUTPUT) VCR, "Y"
Coimectors are available (from
your dealer or Parts Information
Center 1 800 292-6066) to con­
nect to the audio inputs on the TV.
PICTURE AND SOUND FROM PLAY­
BACK OF VCR TAPE
BACK OP IV
siBsao
SUP
SOLlfitJiMAGE
SPEAKER
DINPUT
CASU
J RCA PHONO PLUG
CABLES {NOT SUP-
PLIED)
-------------
AUDIO IN
(RED/WHITE)
BACK OF VCR
VCR
(EQUIPPED WITH VIDEO AND
AUDIO OUTPUT JACKS)
NOTE: THE "TV/VCR" BUTTON
CAN ALSO BE USED TO PLACE
THE TV IN THE VCR/AUX MODE
(AS WELL AS SELECT CHANNELS
3 OR 4.)
20