Philips TS3654C - Manual (Page 6)

□I A
dding
C
hannels in
M
emory
(A
uto
P
rogramming
)
TkJOTE: If you went through
1 T Setup (in your Quick Use
Guide), this task has already been
completed for you.
Your TV can automatically set
itself for local area (or Cable TV)
channels. This makes it easy for
you to select only the TV stations
in your area when the CH(annel)
AT buttons are pressed.
C BEGIN)
<i>
Press the MENU (M) button
on the remote, then press the
MENU A or T buttons to select
the word PROGRAM with the
TV’s on-screen arrow.
r
<s>
Press the (+) button (on the
TV or the remote) to PROGRAM.
Press the (+) button again to
start the TV search for area chan­
nels.
Flashing channel numbers will
count upward on the screen as the
TV looks for channels to "ADD".
Press any button (on the TV or
remote) to stop the channel search
at any time. When the charmel
search is completed the TV will
return to the last viewed channel.
Press STATUS button to clear
the screen.
\ ' / S mari H k U’
Try it out. Press CHAN-
® NEL AT buttons and see
which channels have been added.
Remember, if you want to drop any
unwanted channels from the TV's
memory, see the next page on how
to "Manually" add and delete chan­
nels.
Note: As the TV searches for chan­
nels to "ADD" into memory the on­
screen display may move (or jitter
slightly). This is normal operation
and does not indicate a need for ser­
vice.