Care and maintenance – Perfect Aire 10000PPAC User Manual

Page 13

Advertising
background image

CARE AND MAINTENANCE

CARE AND MAINTENANCE

1) Be sure to unplug the unit before cleaning or servicing.

2) Do not use gasoline, thinner or other chemicals to clean

the unit.

3) Do not wash the unit directly under a tap or using a hose.

It may cause electrical danger.

4) If the power cord is damaged, it should be repaired by the

manufacturer or an authorized repairman.

IMPORTANT:

1. Air filter

- Clean the air filter at least once every two weeks to prevent

inferior fan operation because of dust.

- Removal

This unit has two filters. Grasp the upper filter tab (Fig. 26);

pull the filter out

then up. Remove the lower filter by

loosening the screw, taking down the air inlet grille, then

removing the air filter as shown in Fig. 27 & 28.

- Cleaning

Wash the air filter by immersing it gently in warm water

(about 104

O

F/40

O

C) with a mild detergent. Rinse the filter

and dry it in a cool, dry place.

- Mounting

Insert the upper air filter from the top after cleaning. Attach

the lower air filter on the air inlet grille. Install the grille using

the screw. Make sure the screw is securely fastened.

2. Unit enclosure

- Use a lint-free cloth soaked with mild detergent to clean

the unit enclosure. Finished by using a dry, clean cloth.

Fig. 26

3. Unit idle for a long time

Air filter

(slide out)

- Remove the rubber plug at the back of the unit and attach

a hose to drain outlet. Place the open end of the hose

directly over the drain area in your basement floor.

(See Fig. 24 & 25.)

- Remove the plug from the bottom drain outlet; all the water

in the bottom tray will drain out. (See Fig. 25.)

- Keep the unit running on FAN mode for half of a day in

a warm room to dry the inside of the unit and prevent mold

from forming.

- Stop the appliance and unplug it. Wrap the cord and bundle

it with the band. (See Fig. 29.) Remove the batteries from the

remote control.

- Clean the air filter and reinstall it.

- Unscrew the exhaust hose to the right or left and pull out

for uninstallation. (See Fig. 30.) Keep it safe and cover the

window (or wall) hole.
Winter Storage

If you plan to store the air conditioner during the winter,

uninstall the exhaust hose as described above and carefully

cover the unit with plastic or the original carton. Always store

in an upright position.

Fig. 27

Fig. 29

Remove the

screw and

take the air

inlet grille

off.

Remove the air filter

from the grille.

Fig. 28

Band

Power cord

Fig. 30

12

Advertising
This manual is related to the following products: