phil&teds sport v1 - Manual (Page 13)

baby ` toddler buggy
(carry a newborn baby ` child)
baby ` toddler position requires purchase
of double kit accessory, with plastic hinges,
used to mount double kit in forward position.
Each plastic hinge is marked L or R (Left
and Right when standing behind buggy).
Setting up the baby ` toddler buggy:
1. Put buggy in newborn position.
Apply brakes.
2. Remove bumper bar from front of buggy
by depressing silver buttons on side
tubes, and sliding off.
3. Insert hinges into
correct sides of
double seat
– L and R.
ones ` twos
4. Insert double seat into side tubes
using plastic hinges ensuring silver
buttons engage fully through buggy
frame holes.
5. Double seat will rest on main
frame of buggy.
Buggy can be folded in this position.
WARNING: Never use baby & toddler buggy without
the retaining strap.
11