Five: insert baby – phil&teds sport v1 User Manual
Page 9
![background image](/manuals/708606/9/background.png)
five:
insert baby
Apply brakes and insert baby.
Use safety harness.
1.
Unclip buckles on breastplate
(circled in red) and place baby in buggy.
2.
Set upper strap height to fi t snugly
over baby’s shoulders.
3.
Breastplate
should
fi t snugly on
baby’s chest. (You should be able to
fi t 2 average sized fi ngers between
straps and baby).
4.
Adjust crotch strap length with hook
and loop tape.
5.
Adjust webbing straps to fi t.
WARNING:
Ensure harness is used and properly adjusted at
all times.
7
Note that the windows in the hood are lined with a sun mesh of
a lower shade factor than buggy fabric. Always use sun cream
and clothing for protection of children in direct sunlight.
c
d
e
f
5.
Open hood and attach domes, at
bottom of hood, to main seat,
‘e’.
6.
Pull eyelet at top of hood over pegs
on each side of frame,
‘f’