phil&teds sport v1 - Manual (Page 6)

two: swivel ` swerve
1. Locate and undo frame lock and lift
webbing strap off peg as shown.
2. Lift footwell as far as hinge will allow.
3. Get front wheel (the rod is greased so
watch out for greasy fi ngers!)
5. Release swivel lock. Check your wheel
is in place for use.
to lock/unlock swivel wheel
1. Extend and rotate swivel lock, aligning
silver pin with hole in underside of
swivel lock knob.
2. Turn wheel towards rear of buggy
(parallel with rear wheels). Lock will
then click into place.
3. To swivel, extend black swivel lock out
and rotate until knob rests on silver pin
instead of being inserted into hole.
releasing handle
1. Depress both grey buttons on handle,
and tilt handle towards front wheel to
release it from its locked position.
2. Lift rear axle a little and pull toward
you until you hear a click.
4. Fully extend swivel
lock and insert wheel
rod into buggy frame,
as shown.
swivel lock
4
(Use long webbing lock when front
wheel is on buggy; use shorter web-
bing lock when front wheel is off).