phil&teds sport v1 - Manual (Page 4)

Open your sport carton and check that the
following bits and bobs are there
a. 1 x buggy
b. 2 x rear wheels
c. 1 x front wheel
d. 1 x clear backfl ap (for use when buggy
is in newborn position)
e. 2 x rear wheel axles
f. 2 x rear guards
g. 1 x ‘z’ tool
h. 1 x hood
check your bits ` bobs
To attach
1. Lay buggy fl at, as shown.
2. Position one Rear Guard on buggy
frame, as shown.
You will need:
1 x adult (or someone who follows
instructions!)
Now just follow steps one to five ...
rear guards
2
Your sport buggy has been packed with
Rear Guards for the rear wheels.
Attach prior to fi tting buggy wheels
b
a
c
d
e
f
g
h