PRG S400 User Manual 3.1 - Manual (Page 7)

PRG SERIES 400 ® POWER AND DATA DISTRIBUTION SYSTEM USER MANUAL 1
INTRODUCTION
About This Manual
This manual provides necessary information regarding product safety, installation, and operation for the following
PRG equipment:
+ PRG Series 400® Power and Data Distribution System - 120/208V Model (U.S. / Canada)
This manual applies to S400 software version 3.1.
Familiarizing yourself with this information will help you get the most out of your PRG product.
WARNING: It is important to read ALL accompanying safety and installation instructions to avoid damage to
the product and potential injury to yourself or others.
Additional Documentation
For more information on PRG Series 400® components and systems, refer to the following PRG manuals:
+ PRG Series 400® 400 Amp Disconnect User Manual (02.9680.0200)
+ PRG Series 400® Ethernet Switch User Manual (02.9801.0001)
+ Virtuoso® Node Plus User Manual (02.9801.0301)
+ Virtuoso® Node User Manual (02.9669.0001)
+ PRG Lighting Systems Networking Guide (02.3004.1000.0)
+ S400Tools Utility User Manual (02.9680.0020.10)
(S400Tools Utility is an offline application used for remote control, configuration, and monitoring of Series 400 systems.)
For extended service information, refer to the following PRG manual:
+ PRG Series 400® Power and Data Distribution System Service Manual (02.9680.0010)
For more information regarding DMX512 systems, refer to the DMX512/1990 & AMX 192 Standards publication
available from United States Institute for Theatre Technology, Inc. (USITT).
USITT
6443 Ridings Road
Syracuse, NY 13206-1111 USA
1-800-93USITT
www.usitt.org
For more information regarding Art-Net protocol, refer to the specification for Art-Net II Ethernet Communication
Standard available from Artistic Licence Ltd.
Artistic Licence (UK) Ltd (Registered Office)
24 Forward Drive, Christchurch Avenue,
Harrow, Middlesex, HA3 8NT, United Kingdom
+44 (0)20 88 63 45 15
www.artisticlicence.com