Pro Boat PRB3900 - Manual (Page 4)

44
• Assembled WidowMaker 22
Brushless EP RTR
• Pro Boat radio transmitter
• Boat stand
Install 8 AA alkaline batteries into the
transmitter, following the instructions
provided for your radio system.
Attach the side stand pieces by interlocking
them into the end pieces as shown. Secure
the interlocking pieces with medium CA or
epoxy. Make certain you allow the adhesive
to fully cure before placing your boat on
the stand.
Contents
Section 2: Installing the Transmitter Batteries
Section 1: Assembling the Boat Stand