Section 3: installing the battery pack – Pro Boat PRB3900 User Manual
Page 5
5
Carefully remove the hatch from the hull.
The Pro Boat water-cooled ESC comes
pre-wired with a Deans connector. Use
a 6-cell battery pack listed below for
optimum performance.
• PRB3313 7.2V 3600mAh
w/Deans Connector
• PRB3314 7.2V 4200mAh
w/Deans Connectors
• DYN5360D 7.4V 5300mAh 25C Li-Po
w/Deans connector
Due to the high current demands of
a brushless powered boat, Pro Boat
recommends only the batteries listed
above or equivalent.
Pro Boat offers a charge adapter (PRB3312)
to allow you to charge the PRB3313 and
PRB3314 batteries with Deans connectors
with conventional chargers that use Tamiya-
style connectors.
Follow the instructions included with your fast
charger to ensure a safe charge.
Attach the hook and loop material to the
batteries and the battery boxes.
Install a fully charged battery pack into
the hull.
Section 3: Installing the Battery Pack