PS Engineering PMA8000D Pilot’s Guide - Manual (Page 7)

202-890-0304 Page 7 Oct. 2014 PMA8000D Pilot Guide
Quick reference PMA8000D Operation
This pull-out section covers advanced operation of the PMA8000D.
Bluetooth Connection
1. Turn on the PMA8000D.
2. From your Bluetooth enabled device, search for other devices,
and select either the “PMA8000D Pilot” or “PMA8000D Copi-
lot.”
3. If an access code is required, enter “0000” to connect to the
PMA8000D, unless this is changed (see FAQ #2)
You can now make and receive calls with the audio directed through
the audio panel, and stream music to Music input 1.
The Bluetooth module can be turned off, if desired, by pushing the
AUX and ADF buttons while the unit is being turned on.
The module will reset when unit power is cycled.
Bluetooth® FAQ
1. Some Bluetooth terms to know:
Hands Free — audio panel acts as a hands free telephone hand-
set
Audio Sink — the audio panel will receive music audio stream-
ing from the Bluetooth Device
Stereo headset — the audio panel will receive music audio
streaming from the Bluetooth Device.
Pairing — is when two Bluetooth devices establish communica-
tion and “agree” to connect. This occurs the first time the devices
“meet” and they will store the information to reconnect easily in
the future.
Discoverable — the PMA8000D is always “discoverable.” That
means it will allow any Bluetooth device within range to detect
its presence and attempt to pair. Pairing will only occur when
both devices agree, so you will have to accept the pairing on your
device.
Connection — this occurs when Bluetooth devices that have
been previously paired see each other again and reestablish their
communication. This can happen automatically, or by prompting
the user to accept the connection again. The PMA8000D will
always look for paired devices when it is turned on, and connect
with the first one that allows connection.