PS Engineering PMA8000D Pilot’s Guide - Manual (Page 8)

Page 8 202-890-0304 Rev. 2 PMA8000D Pilot Guide
2.What access code do I use?
a. If your phone requires an access code to complete the pairing,
you can use 0000 (all zeros). See the table if you wish to
change the audio panels access code to “1234,” or “1111”.
3. How many devices can I pair with the audio panel?
a. You can pair up to eight devices. After that, the audio panel
will “forget” one device when another is added. Due to the
nature Bluetooth, we can’t predict which device will be
dropped. If your desired device is dropped, simply re-pair the
one you want.
4. How many devices can I use at the same time?
a. You can connect multiple devices such as a Smartphone and an
iPad for music, but only one telephone can be connected to any
audio panel at a time.
5. Can I use a different music source other than my phone?
a. Yes, you can. However the music device, must be paired and
connected first, before the telephone is turned on. In Smart-
phone such as Motorola Droid, you should specifically disable
the Bluetooth phone or music portion, depending on function to
be used. Note, if an iPhone is connected second, you may not
be able to stop it from taking over the music. Some phones
must manually select the PMA8000D as an audio source for
the phone after the music is connected.
6. My Smartphone didn’t reconnect, what do I do?
a. It is most likely that the PMA8000D dropped the pairing either
because of added pair that exceeded the limit, or because of
some corruption in the stored information. Simply un-pair by
deleting the PMA8000D in your Bluetooth phone, and re-
pairing with the audio panel. This is often true if you leave the
Bluetooth range, and return while the audio panel is still on.
Hold button on power up Pairing Code
COM 3 0000 (default)
NAV 1 1234
NAV 2 1111